National ramp ALUMINUM SOLID, Руководство по установке

Страница: 110 / 138

20.9

Starting at the top of the outside of the ramp, and working down,
connect and tighten all handrails.
20.9.1.
Tighten the handrail bolts on the starting platform, then insert the corner elbows.
20.9.1.1.
Remove the two halves of the elbow from the packaging. One half will have the
nut and bolt to join the two halves.
20.9.1.2.
Insert first half of the elbow into top adjoining handrail.
20.9.1.3.
Lock elbow into handrail by tightening Allen bolt (clockwise).
20.9.1.4.
Repeat for second half of elbow to bottom adjoining handrail.
20.9.1.5.
Check alignment and join two elbow halves using provided bolt and nut.
20.9.1.6.
Once everything is aligned, tighten bolt to join two elbow halves.
20.9.2.
Measure and cut handrails at starting section.
20.9.2.1.
Align the handrails on the seam with the longer ramp handrails up towards the
platform. Place the edge of the elbow against the fixed platform handrail and
mark the top and lower ramp handrails where they will need to be cut.
20.9.2.2.
Cut the handrails using a pipe cutter, double checking there are no burrs left.
20.9.2.3.
Insert the elbow between the platform and section handrails and tighten.
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
Tighten Elbow
Connector With An
Allen Key
Platform Handrail
Section Handrail
[ 110 ] NATIONAL RAMP
™
| FREEDOM NOW
www.nationalramp.com | 877-884-RAMP(7267)
image 99