National ramp ALUMINUM SOLID, Руководство по установке

Страница: 109 / 138

20.6  Install the landing pad.
20.6.1.
Slide the 60" BTP into the end of the landing pad.
20.6.2.
Lay the landing pad under the end of the last ramp section, so the ramp BTP is squarely on
the landing pad. The landing pad BTP should face the exit direction of the ramp.
20.6.3.
Make sure that the landing pad doesn’t wobble. Pack dirt or gravel underneath the landing
pad if needed to keep it level and supported.
20.7  Check ramp components are correctly placed before final adjustments.
20.7.1.
Confirm the pitch is correct with a laser level, and use a string to check that the slope is
consistent within ramp runs.
20.7.2.
Stretch the string from the top of the first 6' section to the bottom of the second 6' section
between platforms. The ramp sections should follow the string.
20.8  After confirming all legs are plumb, tighten all the leg bolts.
image 98
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
[ 109 ]
Liberty Series™ Ramp Installation Guide-Revision 8/1/2020
TW
O LA
Y
OUT C
ONFIGURA
TIONS S
T
AR
T T
O FINISH