National ramp ALUMINUM SOLID, Руководство по установке

Страница: 54 / 138

18.2.3.
Mount the handrails, hand-tightening the bolts to allow for later adjustments.
18.2.4.
Set the legs to the correct height.
18.2.4.1.
Measure the height that the legs will be
set to, from the platform’s travel surface
(not the toe guard) to the ground or
Celebration Footer Pad™.
18.2.4.2.
Select the shortest leg that is at least 2"
above the measured height.
18.2.4.3.
Mount the legs to the platform, without
fully tightening the bolts to allow for
later adjustments.
Step 2

Carry the platform over to the ramp and hook the tongue into the groove of the
last installed ramp or platform section.
Step 3  Level the platform
18.2.5.
Adjust the legs if needed so the platform is level and at the correct height, and the legs are
plumb (vertically straight).
Do not walk on the ramp until the
entire system is up and the legs
have been tightened.
TIPS AND TRICKS
While it is recommended for
the platform to be installed
completely level, the platform
can be installed at up to a 1°
angle cross slope (1/4" per
foot) to allow for rain runoff.
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
C ustome r:
Proje c t:
Height to set leg from travel
surface to ground
[ 54 ] NATIONAL RAMP
™
| FREEDOM NOW
www.nationalramp.com | 877-884-RAMP(7267)
image 16
image 17