manualshive.com logo in svg

NANOTEC ELECTRONIC N5, Техническое руководство

Поделиться
Скачать
NANOTEC ELECTRONIC N5 Скачать руководство пользователя страница 32

Technical Manual N5 (CANopen)
4 Commissioning

A static IP address is also assigned to the communication partner. Settings using the Windows 7
operating system as an example:

1. Press the Windows Start button and select Control Panel.
2. Select Network and Sharing Center.
3. Select Change adapter settings.
4. A list of the available network adapters is displayed. Open the properties on the adapter with which

the controller is connected (e.g., right-mouse click and select Properties).

5. Select Internet Protocol version 4 (TCP/IPv4) and press the Properties button.
6. Select the Use the following IP address: option and enter the desired IP address and network mask

in the IP address field.

7. Confirm acceptance of the entries with the OK button.

4.1.3 REST web services

Introduction

The protocol used by the the web server is HTTP/1.0. The architecture here is realized according to
REST (Representational State Transfer) which, in addition to access to the NanoIP web interface, also
offers the possibility to access objects/resources. The values in the object dictionary are an example of
this.

The operations supported here are:

•

GET

: Request a resource

•

POST

: Add a new resource

•

PUT

: Create or change a new resource

•

DELETE

: Delete a resource

Resource names

The name of a resource is always specified in the URI (Uniform Resource Identifier) notation familiar
from the Internet. Via this URI, the controller supports access to the file system and the object
dictionary. The identifiers for this are:

•

Od: Object dictionary

•

Fs: File system

Version: 2.0.1 / FIR-v1650

32

Содержание N5




























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды