MYERS MP Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 85 / 149

85
2.3.6.3 Using a Direct PC to Ethernet Card Connection with RJ45 Cross
Over Cable
IMPORTANT NOTE…FOR A DIRECT ( PC TO ETHERNET CARD RJ45 CROSS OVER
CABLE
CONNECTION ) YOU MUST BE LOGGED INTO THE PC UNDER THE PC’S NAME,
NOT e.g. LOGGED IN UNDER A NETWORK NAME…otherwise a web browser will not
find
the HTML Ethernet card.
YOU MUST HAVE ADM
INISTRATOR’S ACCESS TO THE PC.
•
Set the PC for a fixed IP address 192.168.1.xxx ( xxx = 0 to 255 except 51 ) (UPS
Ethernet card at default 192.168.1.51)
•
Set the PC’s subnet mask for 255.255.255.0.
•
Go to the PC’s Network Connections to access the LAN configuration screens
as shown in Figure 6-42.
•
The Internet Protocol Connection Authentication Box shown in Figure 6-43 will
appear.
Figure 6-42: LAN Configuration Screens
Note: You must
have administrator’s access to the PC to access
these screens.
Some older PC operating systems require reboot for the changes to
take effect. You can verify by running command line
“ipconfig”…C:\>ipconfig.