MYERS MP Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 61 / 149

61
Parameter 44
– Slow Detect Boost High – When the input utility line exceeds this
voltage setting the BBS will transfer to Line Mode from Boost Mode.
3. Line Qualify Adjustment
– This adjustment sets the time duration the line must
be qualified prior to transferring to line mode. The setting can either be 3, 10,
or 30 seconds. This adjustment can be made by entering the Settings Menu,
then the Line Qualify Menu, and selecting the desired set point. The same
adjustments can be made in the RS232 Menu by entering 34 from the Main Menu
screen and then entering the desired time.
4. Ext Fan Control Adjustment
– This adjustment allows the user to set the
temperature above which the 48VDC power will be provided for the external fan.
The setting is adjusted from 20
o
C to 55
o
C in 1
o
C increments. The adjustment
can be made by entering the Settings Menu, then the Ext Fan Control, and
selecting the desired set point. The same adjustments can be made in the
RS232 Menu by entering 39 from the Main Menu screen and then entering the
desired temperature.
5. Battery Charging Temp Comp
– This adjustment allows the user to set the
temperature compensation for the battery charger. The setting is adjusted to
either 2.5, 3, 4, or 5mv/ºC. This adjustment can be made by entering the Settings
Menu, then Batt. Comp, and selecting the desired set point. The same
adjustments can be made in the RS232 Menu by entering 38 from the Main Menu
screen and then entering the desired set point.