MYERS MP Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 112 / 149

112
2.3.6.28 NetAgent Telnet Screens
From the command line prompt e.g. C:>telnet [ NetAgent card IP address]
Alternatively use a terminal emulator such as Hyperterminal
<<<<< Main Menu >>>>>
<<<<<---------------------------------->>>>>
1. Set IP Address.
2. Set SNMP MIB System.
3. Set SNMP Access Control.
4. Set SNMP Trap Notification.
5. Set UPS Properties.
6. Set UPS Devices Connected.
7. Set System Time & Time Server.
8. Set Web and Telnet User Account.
9. Set E-mail.
a. Reset Configuration to Default & Reboot
c. Save & Reboot.
0. Exit Without Saving.
Select =>
<<<<< Set IP Address >>>>>
<<<<<---------------------------------->>>>>
1. IP Address. (192.168.1.51)
2. Gateway Address. (192.168.1.1)
3. Subnet Mask. (255.255.255.0)
4. Obtain an IP address automatically. (By manual)
5. IPv6 Address. (::)
6. Obtain an IPv6 address method. (Automatic)
7. Router Discovery Autoresend. (YES)
8. Obtain an DNS Server IP address method. (By manual)
9. Primary DNS Server IP. (212.1.120.3)
a. Secondary DNS Server IP. (nameserver)
b. Third DNS Server IP. ()
c. Fourth DNS Server IP. ()
0. Return to Main Menu.
Select =>
<<<<< Set SNMP MIB System >>>>>
<<<<<---------------------------------->>>>>
1. System Contact. (Administrator)
2. System Name. (UPS Agent)
3. System Location. (My Office)
0. Return to Main Menu.
HyperTerminal Settings Example