MUTOH Viper Extreme, Руководство пользователя

Страница: 27 / 148

User’s Guide Viper Extreme
CHAPTER 3: Basics
27 AP-75330 – Rev. 1.0 – 14/01/09
3.2.2 Setting media type
Step 1 :
Switch the printer ON and load the media.
Once the media has been set, the media initial menu will be displayed.
Step 2 :
Press one of the following keys and select the current media type.
When alternating roll/sheet media selection: [F2]
When changing from media loading: [F3]
When changing media type: [F4]
Setup items Key Parameters Description
Media type F2 Roll media Alternates the roll media type.
• Roll media: Set when loading roll media.
• Sheet media: Set when loading sheet media.
Sheet media
Lever Down/Up F3 Lever up Switches between up and down motion of the pressurizing
lever.
Use this when starting over from the media setup.
Lever down
Media Type F4 User 1 Set media type for printing.
For setup values of printing operation, eight settings of "user 1-
8" are available.
Refer to ‘Menu Overview’
User 2
User 3
User 4
User 5
User 6
User 7
User 8
Step 3 :
Press the [Enter] key.
The media type has been set.
Notes
The printer starts the media initial operation if you :
±
Press the [CANCEL] key.
±
Leave the printer for 10 seconds without doing anything
Step 4 :
When the media initial operation finishes, the printer moves to normal status.
The setting media loading procedure has been completed.