MUTOH Viper Extreme, Руководство пользователя

Страница: 135 / 148

User’s Guide Viper Extreme
CHAPTER 6: Periodical maintenance
135 AP-75330 – Rev. 1.0 – 14/01/09
6.2 DONE BY AUTHORISED MUTOH TECHNICIAN
An Authorized Mutoh technician must check and replace some components of your printer on frequent base
(every 6 and 12 months).
Be sure to remind your distributor when the replacements must be done.
It is very important not to skip a maintenance intervention in order to maintain constant print quality and to
keep your warranty.
Please refer to the table below to know what the Authorized Mutoh technician must do.
N° Action Frequency
1 Change spitting box mesh 6 monthly
2 Apply grease on head up-down camm when needed 6 monthly
3 Apply grease on Y-motor belt when needed 6 monthly
4 Apply grease on roller path carriage when needed 6 monthly
5
Apply grease on capping station camm + gears when needed 6 monthly
6
Clean in maintenance area 6 monthly
7
Dust removal in fan area underneath print platform 6 monthly
8 Change dampers yearly
9 Change pumps yearly
10 Change wiper arm and wipers yearly
11 Change spitting box assembly yearly
12 Change capping station yearly
13 Change the flat cable mousse yearly
Notes
All cleaning in “Ink areas” must be done with Mutoh Water based cleaning.
Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If you use the machine more, maintenance periods will come earlier.
Available kits for Authorized Mutoh Technicians only and their part numbers:
maintenance cycle Kit 12 months KY-80224