MUTOH Viper Extreme, Руководство пользователя

Страница: 124 / 148

User’s Guide Viper Extreme
CHAPTER 6: Periodical maintenance
124 AP-75330 – Rev. 1.0 – 14/01/09
6.1 DONE BY END USER
This section describes the periodical services required for this machine. The periodical services ensure
stable printout quality of the machine. In the periodical services, some service parts must be checked,
cleaned, or replaced.
Perform periodical inspections according to the table below.
N° Action Frequency
1 Clean the wipers Weekly
2 Clean the caps in the maintenance station Weekly
3 Clean around the bottom of the heads Weekly
4 Clean spitting box mesh Weekly
5 Replace the wipers Every 3 months
6
Change the upper sponge at the back of the capping
station
Every 6 months
7 Change the filter of the fans Every 6 months
Notes
All cleaning in “Ink areas” must be done with Mutoh Water based cleaning solution.
Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If you use the machine more, maintenance periods will come earlier.
Available kits for the end user and their order numbers
1. Maintenance kit for 6 months KY-80223
N° Description Quantity
1 Absorbent 2 1
2
Grease 1
3 Wiper 8
4 Water based textile cleaning 1
5 PE gloves 100
6 Pipet 10 ml 4
7 Swabs & applicator foam 1
8 Polyknit wiper 1
9 Filter fan diverter 2