MUTOH Viper Extreme, Руководство пользователя

Страница: 10 / 148

User’s Guide Viper Extreme
CHAPTER 1: Safety instructions
10 AP-75330 – Rev. 1.0 – 14/01/09
1.4 SAFETY INSTRUCTIONS
Machines must be installed according to Mutoh’s Installation Guide also after moving machines to
another location; maintenance needs to be done according to the maintenance manual.
To prevent fire or electrical shock, never use a power supply source other than the one rated for the
product in the country where you purchased the product.
Use only the provided power cable. To prevent fire or electrical shock, follow the instructions below
when handling the power cable:
±
Do not cut or modify the cable.
±
Do not put heavy objects on the cable.
±
Do not bend, twist, knot or pull the cable.
±
Do not wire the cable near equipment that generates heat.
±
Do not use the cable with any other electrical device
±
Do not handle the cable with wet hands
Be aware of all caution and warning labels to avoid potentially hazardous situations.
To prevent fire or electrical shock, machines must be connected to a properly grounded electrical power
outlet. Do not connect the power cable to a power strip or a power source shared by other electrical
devices.
±
Make sure that no foreign substances such as dust etc. are stuck to the power plug.
±
Insert the power plug firmly to the edge of the power socket.
Do not disable any safety precautions systems.
Do not operate the unit unless all parts are mounted.
Do not place the machine in the following areas. Doing so may result in the machine tipping or falling
over and causing injury.
±
Unstable surfaces
±
Sloping floors
±
Areas subject to vibration by other equipment
Do not stand on or place heavy objects on your machine. Doing so may result in the machine tipping or
falling over and causing injury.
Do not place the machine in humid and dusty areas or in areas exposed to flammables. Doing so may
result in electrical shock or fire.
Do not cover the ventilation hole of your machine with cloth, such as a blanket or table cloth. Doing so
could obstruct ventilation and cause fire.
Do not insert or drop metal or inflammable objects into openings, such as ventilation outlets. Doing so
may result in electrical shock and fire.
Do not touch the media guide during printing. It is hot and may cause a burn.
Do not touch the media feed slot, platen or media guide while heaters are operating. They are hot and
may cause a burn.
Do not bend or pull the waste fluid tube. Doing so may cause waste fluid to leak out and malfunction of
the product.