6
Configuring TRAIL-Control
Configuring automatisms when driving in reverse
34
V2.20160912
30322332-02-EN
Reaction to the reverse driving signal in manual mode
When the system is working in manual mode and the vehicle drives in reverse, the trailed implement
can be centered.
Centering with reverse driving signal
As soon as the vehicle comes to a stop (speed = 0 km/h), the icon appears on the screen ( for axle
steering). If you drive in reverse in the next 10 seconds, the trailed implement will be centered. If you
only drive in reverse after the 10 seconds have expired, nothing happens. This aims to prevent the
trailed implement from being centered when parked vehicles are driven in reverse.
Important remarks:
▪ When the () icons appear, you can immediately steer the trailed implement manually.
▪ If you press the
(
) or
(
) buttons during the
automatic centering procedure, the centering will be aborted.
▪ The centering procedure never takes longer than 8 seconds. If the trailed implement is not
centered after 8 seconds, the centering procedure is aborted.
▪ Several tractors send a reverse driving signal unexpectedly or without reason, even if they are
standing still. To minimize the risks for the driver, the automatic centering can only be
automatically activated in the first 10 seconds after the vehicle comes to a stop. If the vehicle has
been standing for longer than 10 seconds and only then driven in reverse, automatic centering
will not be performed.
Reaction to the reverse driving signal in automatic mode
If the system is working in automatic mode and the vehicle drives in reverse, up to three automatic
functions can be defined.
Step
Image with box
Explanation
1
Return to manual mode
As soon as the reverse driving signal is detected,
manual mode will be activated. Most drivers prefer to
steer the trailed implement manually when driving in
reverse.
2
Automatic centering
Automatic centering can be performed simultaneously
with the activation of manual mode.
3
Return to automatic mode
When you drive forwards again, the system can activate
the automatic mode. This only happens within the first
30 seconds after setting the system to manual mode.
6.6.1
Mode of operation
6.6.2
