Configuring TRAIL-Control
When should you configure what?
6
30322332-02-EN
V2.20160912
23
Configuring TRAIL-Control
When should you configure what?
The following table shows an overview of the configurable functions and specifications, and shows
when these functions must be configured:
To be configured
Initial start-up
In other cases
When you are working on a slope or
leaving a slope.
(optional)
●
When changing tractors.
●
When changing tractors.
When the steering starts up abruptly.
●
When changing tractors.
Distance between the rear wheel axle of
the tractor and the towing hook. [
●
When changing tractors.
●
At the start of each season.
When the displayed speed is
incorrect.
Calibrating the TRAIL-Control hydraulic
system [
●
When the system is not working
accurately.
Adjusting the configuration to the tractor
As a user, you have the option of changing several parameters. These can slightly influence the
reaction of the system or enable connection to a different tractor.
To call up the parameters:
Start screen is called up.
1.
Switch to the "TRAIL Control" screen:
6
6.1
6.2
Procedure