Product description
Functions of the ISOBUS-TRAIL-Control system
3
30322332-02-EN
V2.20160912
9
Product description
Functions of the ISOBUS-TRAIL-Control system
ISOBUS-TRAIL-Control serves to steer the trailed implement during field operation. In doing so, it
supports the driver in the following ways:
▪ It keeps the trailed implement in the tractor track.
▪ When working on slopes, it steers the trailed implement up the slope so that it does not slip out
of the tractor track.
The system can control two types of steering systems:
▪ Drawbar steering - These systems only steer the drawbar to the left or right to influence the
course of the trailed implement.
▪ Stub axle steering - These systems steer the steering axle of the trailed implement to the left or
right to influence the course of the trailed implement.
The following requirements must be met for TRAIL-Control to work:
▪ Minimum speed = 3 km/h. Steering is not possible at lower speeds.
▪ (Default) Maximum speed = 15 km/h. If you drive faster than 15 km/h, the TRAIL-Control function
will be automatically switched off.
Note:
The implement manufacturer is capable of increasing or decreasing the maximum speed
before delivering the field sprayer to adjust it for the characteristics of the field sprayer and its
intended use.
▪ The maximum speed can be adjusted for the trailed implement and increased by the implement
manufacturer.
▪ Minimum oil throughput for the hydraulic system of the tractor = 25 l/min. The minimum oil
throughput may be greater for large field sprayers.
3
3.1
Functions
Versions
Preconditions
