5
Operating the system
Using the joystick
22
V2.20160912
30322332-02-EN
⇨
TRAIL-Control is ready for driving on the road.
Using the joystick
If you connect a joystick provided by Müller-Elektronik to the system, you can use it to operate the
system. Other joysticks and external control devices are not supported.
"Joystick" parameter
On the "Implement data" screen, you can find the "Joystick" parameter, where you can make several
settings. However, you do not need to do so. This parameter has no function in this system. To use
the ME joystick, it is sufficient to connect it according to the joystick instructions.
As a standard, the buttons on the joystick are assigned as follows:
Switch between TRAIL-Control's manual and automatic mode
Switching TRAIL-Control on and off
Buttons 1-4 are not assigned.
Steer trailed implement to the left
Steer trailed implement to the right
However, the implement manufacturer is capable of changing this button assignment. In this case, he
must inform you of this.
To operate TRAIL-Control with the joystick provided by Müller-Elektronik:
Joystick is connected.
Joystick is configured for Auxiliary 1 mode. You can find more information on this in the
instructions for the joystick.
1.
Move the side switches up and hold.
⇨
The LED on the joystick lights up red.
2.
Press button with the desired function. See the table above.
⇨
The function is executed.
3.
To terminate the function, release the pressed button and the side switch.
5.8
Button assignment
Procedure
