4
Mounting and installation
Mounting the gyroscope
14
V2.20160912
30322332-02-EN
Mounting and installation
Mounting the gyroscope
The gyroscope is a sensor that determines the angular speed when the tractor changes direction.
To mount the gyroscope you must carry out the following:
▪ Mount the bracket on the tractor.
Mounting the bracket for the gyroscope
Bracket
Gyroscope in the bracket
Mounting the bracket on the tractor
The bracket on the tractor is used for fastening the gyroscope to the tractor for the duration of work in
the field.
1.
Determine the position for mounting the bracket on the tractor.
The bracket must be mounted vertically and without vibration on the rear of the tractor.
Make sure that the connection cable of the gyroscope does not become too tight when fastened
in the bracket.
2. CAUTION! Before drilling a hole, make sure that for drilling you are not going to damage
any cables.
3.
Drill the holes for the screws.
4.
Fasten the bracket.
The bracket must be fastened securely to prevent shaking while driving.
4
4.1
4.1.1
Procedure