Operating the system
Switching TRAIL-Control on and off
5
30322332-02-EN
V2.20160912
17
Operating the system
Switching TRAIL-Control on and off
WARNING
Moving implement
Before you switch on the system, make sure that there are no persons or objects nearby.
To switch on the system:
The vehicle is standing on the field.
There are no persons close to the vehicle.
The boom is unfolded. The "Boom unfolded" sensor (if the sensor is installed) is activated.
The drawbar is not mechanically locked.
The ladder is not extended or unfolded. (If the ladder sensor is installed).
1.
Fasten the gyroscope onto the tractor.
2.
Connect the ISOBUS cable of the job computer to the ISOBUS socket of the tractor.
3.
Start the terminal.
4.
In the terminal selection menu, open the application:
⇨
The work screen appears.
⇨
On systems with drawbar steering:
⇨
On systems with stub axle steering:
⇨
Only the current speed appears on the screen. The system is not yet activated.
5
5.1
Procedure
