3
Product description
System Overview
10
V2.20160912
30322332-02-EN
System Overview
Example for a system with drawbar steering
Main cable harness
Ladder sensor*
The ladder sensor serves to detect whether a ladder has been extended on the trailed implement. In
this case, TRAIL-Control is blocked and cannot be activated.
Proportional valve
Angle sensor
Determines the angle of a hydraulic cylinder on the drawbar or on a stub axle.
For systems with stub axle steering, this sensor is installed on a stub axle.
Drawbar locking sensor*
Sensor that detects when the drawbar has been locked with a pin.
Gyroscope with two brackets
Detects changes in the driving direction of the tractor.
ISOBUS cable with plug
Cable from the ISOBUS job computer to the ISOBUS socket on the tractor.
ISOBUS job computer
Control unit that is responsible for system operation.
"Boom unfolded" position sensor*
Sensor that detects when the boom has been unfolded and is ready for field work. This is mandatory
for using TRAIL-Control. The system is locked when the boom is folded in.
Sprayer slope sensor
Sensor that detects the tilt of the trailed implement to enable the slope counter-steering function.
Wheel sensor*
Serves to determine the vehicle speed.
* - Optional sensors. Because there is a limited number of sensor inputs, not all of the optional
sensors can be installed and used on the implement.
Layout of the work screen
The work screen is the screen that should be called up after activating the system.
This screen allows you to:
3.2
3.3
