mru SWG 100 SYNGAS, Руководство пользователя

Страница: 104 / 129

USER MANUAL SWG
Page 104 of 129
9.2. Analyser Status (address 0 and some mirror addresses)
The Analyser Status is a 32bit-word and must be interpreted bitwise.
Bit Description
0
Power-On
(until the first zeroing has been done)
1 System-Alarm, see table below
2 Air Purging (zeroing)
3 Gas Sampling (preparing measurement, not measurement!)
4-7
Currently sampled sample point number
(1..10, reads 0 while air purging)
8-31
reserved for later applications
(read zero)
Some status examples:
Decimal
Hexadecimal Binary state description
1 0001h 0000 0001 Power-On (self-test)
5 0005h 0000 0101 First Air Purging (Power-On + Air Purging)
24 0018h 0001 1000 Preparing meas. smp.pt.1 (Gas Sa smp.pt.1)
16 0010h 0001 0000 Measuring sample point 1
32 0020h 0010 0000 Measuring sample point 2
48 0030h 0011 0000 Measuring sample point 3
18 0012h 0001 0010 Measuring sample point 1 + System-Alarm
9.3. Analyser System Alarm (address 2 and some mirror addresses)
The Analyser System Alarm is a 32bit-word and must be interpreted bitwise.
Bit Description Meas. halted
0 Mainboard Offline (some communication problems) YES
1 Mainboard is in bootloader mode YES
2 CH4 ambient > threshold value YES
3 Condensate YES
4 Sample flow < 20 l/h -
5 Case fan rotations < 900 rpm -
6 T-gascooler > 10°C -
7 T-gascooler < 2°C -
8 T-Sensor > 55°C -
9 T-Sensor < 5°C -
10-31 reserved for later applications
Some system alarm examples:
Decimal
Hexadecimal Binary state description
1 0001h 0000 0001 Mainboard is offline, measurement is halted
8 0008h 0000 1000 Condensate Alarm, measurement is halted
80 0050h 0101 0000 Sample flow < 20 l/h and T-gascooler > 10°C.