mru SWG 100 SYNGAS, Руководство пользователя

Страница: 69 / 129

USER MANUAL SWG
Page 69 of 129
6. Cycle configuration
0010
6.1. Path and default setting
Extra/ Measurement cycle config.
When the menu
“M
EASUREMENT CYCLE CONFIG
.”
is selected the user definable setting for the
measurement cycle will appear (see screenshot below).
6.2. General information
The menu point
CYCLE CONFIGURATION
”
allows the user to configure an individual measurement
cycle. Every installed sample point can be configured. For the configuration the user has the
following phases, which can be selected:
•
Zeroing.
•
Purging.
•
Stand-by.
•
The configuration is performed with the three function keys
F1
,
F2
and
F3
.
•
F1
: Delete a phase.
•
F2
: Make an Auto-config.
•
F3 : Insert a new phase.
•
OK
: View/change phase details
•
Left/right
: Change the phase type.
6.3. Auto configuration
With
F2
-
configurations.
•
One zeroing / cycle.
•
One zeroing / sample point.
The first program is for applications where the different measurement points have almost the same
gas concentrations. The zeroing is not necessary at every change of the measurement SPX.
The second program is for applications where the different measurement points have different gas
concentrations. A zeroing is recommended after every measurement point change.
comparison.
Screenshot shows default setting, when the
„M
EASUREMENT CYCLE CONFIG
.”
will be started
the first time.