MREL Blaster's Ranger II Lt, Руководство по эксплуатации

Страница: 16 / 78

10
Blaster’s Ranger II Lt Operations Manual - Edition 1.1
Lt
The Blaster’s Ranger II™ Lt is powered by the external 12V power supply cable or
the AC adapter provided , which is included with the camera.
3.2.1 Attaching the External DC Power Supply
The 12V DC Power Supply operates on 100-240VAC, 50-60Hz. The socket is a
standard IEC 13, used worldwide for all types of electronic equipment.
1. Attach a power cord to the power supply and connect it to an AC power
outlet.
2. Attach the power supply output cord to the camera via LEMO connectors. The
LEMO connector is keyed: the red dot on the connector will face the LCD side
(back) of the camera.
Table 1: Battery LED States
Operating / Charging Charge Status LED Behavior
Operating >15% Green
Charging > 15% Blinking Green
Operating < 15% > 5% Amber
Charging <15% >5% Blinking Amber
Operating <5% Blinking Red
Charging <5% Blinking Red
Operating Not Installed Blue
3.3 Camera Setup
There are several precautions that must be remembered prior to using the Blaster’s Ranger II™ Lt . The suggested procedure for assembly
of the system is detailed in the following sections.
3.1 Introduction
3.2 Powering Up
This chapter provides an outline of how to setup the Blaster’s Ranger II™. This chapter assumes
that the User will first want to unpack the Blaster’s Ranger II™ Lt and set it up in an office
environment in order to learn the camera controls.
This chapter provides a detailed description of the setup procedure for the Blaster’s Ranger II™ Lt . For instruction on using the Blaster’s
Ranger II™ Lt , please refer to Chapter 4 and 5 . For Instruction on using the Blaster’s Ranger II™ Lt in the field, please refer to Chapter 6 .
Overview
Figure 1: Attaching the DC Power Supply