MREL Blaster's Ranger II Lt Скачать руководство пользователя страница 21

Страница: 21 / 78

T: +1-613-545-0466 F: +1-613-542-8029 www.mrel.com

4.2 Language Selection in FasMotion

To select a language in FasMotion:

1.  Open the FasMotion Application
2.  Click on View
3.  Select Language from the View Menu
4.  Make your language selection

4.3 Connect the Camera to a Wired Network

The

Blaster’s Ranger II™ Lt

requires a network connection for setup and control via FasMotion software or the built-in Web-App.

This section addresses the use of FasMotion. The default network configuration for the

Blaster’s Ranger II™ Lt

is static IP address

192.168.1.18.

To attach the

Blaster’s Ranger II™ Lt

to a network:

1. Before connecting to power, connect the

Blaster’s Ranger II™ Lt

to your network via a switch or router, or directly to your PC using

CAT 5E or CAT 6 Ethernet cable.

2. Power up the

Blaster’s Ranger II™ Lt

3. Watch the LEDs on the camera’s RJ-45 connector. When the camera connects to the PC or local network the green LED will begin to

blink in a pattern depending on connection speed.

4. Start the FasMotion software application.
5. Select a camera from the “Found Cameras” list in FasMotion. Double-click to open.

Note:

It is possible to use a wireless adapter on your PC, but it is not recommended because of performance issues.

Make sure the “Stream Video Upon Connection” box is checked if you wish to view live video when the camera connects.

Note:

If the camera you are looking for does not appear on the list, you can click on the Find Manually button and enter its IP address.

4.4 Managing Camera Network Settings in FasMotion

The network settings of the

Blaster’s Ranger II™ Lt

may be configured using the Network Configuration dialog in FasMotion:

1. Click on the camera you wish to manage (do not double-click) to highlight the selection.
2. Right click, Change IP Address...or from Camera...Configuration...Network...

Содержание Blaster's Ranger II Lt















































































Результаты поиска

Содержание Blaster's Ranger II Lt

Отзывы:

Похожие инструкции для Blaster's Ranger II Lt

Бренды по названию

Популярные бренды

MREL Blaster's Ranger II Lt, Руководство по эксплуатации

Результаты поиска

Содержание Blaster's Ranger II Lt

Отзывы:

Похожие инструкции для Blaster's Ranger II Lt

Бренды по названию

Популярные бренды