manualshive.com logo in svg

MR TAPCON 230 AVT, Руководство по эксплуатации

Поделиться
Скачать
MR TAPCON 230 AVT Скачать руководство пользователя страница 92

9 Operation

Maschinenfabrik Reinhausen GmbH 2021

92

7817454/02 EN

TAPCON

®

 230 Expert

You can only change access rights if you are assigned an administrator
role.

When in delivery status, you can log in as the administrator as follows:

▪ User name: 

admin

▪ Password: 

admin

1. Go to 

Settings > Administration > Parameters/events

.

ð

A list of all parameters or events appears.

2. Select the desired entry in the list.

3. Select the desired options.

4. Press the 

Accept

 button to save the change.

9.1.12 Hardware

Under Hardware, you can display information about the device's hardware.
You will find information about the signal level of the individual channels for
the assemblies.

1. Go to 

Information > Hardware

.

2. Select the desired 

Assembly

 in order to display the signal levels of the

channels.

9.1.13 Software

Under Software, you can display the version status of the software compo-
nents of the device.

► Go to 

Information > Software

.

9.1.14 Import/export manager

The device is equipped with an import/export manager which can be used to
transmit data using a PC via the web-based visualization system.

9.1.14.1 Exporting data

You can export the following data from the device:

Option

Description

System image

Complete image of the system (software and configuration). If
you are using the option "with history", all of the event memory
entries are also exported.

System configu-
ration

System configuration

Customer pro-
gram (optional)

Customer program export (TPLE).

Содержание TAPCON 230 AVT







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды