manualshive.com logo in svg

MR OILTAP R, Инструкции по установке и вводу в эксплуатацию

Поделиться
Скачать
MR OILTAP R Скачать руководство пользователя страница 15

2 Safety

Maschinenfabrik Reinhausen GmbH 2015

15

4427410/00 EN

OILTAP® R

Wear the following in spe-
cial environments

Special personal protective equipment
is needed in special environments.
The choice of equipment depends on
the circumstances.
Safety glasses

To protect the eyes from flying parts and
splashing liquids.

Hard hat

To protect from falling and flying parts and
materials.

Hearing protection

To protect from hearing damage.

Table 5: Personal protective equipment to be worn in special environments

Protective devices

The following protective devices for the product are included as standard in
the scope of delivery or are available as options.

Protective relay RS

The protective relay RS is an oil flow-controlled relay in accordance with IEC
60214-1. It is installed between the on-load tap-changer head and the oil
conservator of the on-load tap-changer.

It triggers when the specified oil flow between oil compartment of the on-load
tap-changer and oil conservator is exceeded.

Pressure monitoring device

The pressure monitoring device DW 2000 is installed on the outside of the
on-load tap-changer and is tripped by unacceptable static and dynamic pres-
sures in the on-load tap-changer oil vessel.

Additional use of a pressure-operated relay also requires installation of the
provided RS 2001 protective relay.

The features and characteristics of the pressure monitoring device comply
with the respective applicable version of IEC publication 60214-1.

2.7

2.7.1

2.7.2

 

Содержание OILTAP R















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды