MQ Power DCA220SSJU4F, Руководство по эксплуатации

Страница: 76 / 80

PAGE 76 — DCA220SSJU4F 60 HZ GENERATOR • OPERATION MANUAL — REV. #3 (02/10/17)
BASLER DGC-2020 PROGRAMMING APPENDIX (OPTION)
• Multigen Management
o AVR Output
o
GOV Output
o LS (Load Share) Output
o
Demand Start/Stop
o
Sequencing
o
Network Configuration
o
Load Shedding
•
Logic
o
Logic Timers (1-8)
o
Logic Timers (9-16)
o
Logic Counters
o
Broadcast Logic
Summary
• System Configuration One-Line Diagram
• Mains Fail St (Status)
o Mains Fail St (Status)
o Transfer Delay
o Max Transfer Time
o Return Delay
o Return Timer
o Max Parallel Time
o Open Transition Delay
• Gen VLL
• Gen Hz
• Gen Aac
• kW
• kvar
• PF (Power Factor)
• PF Lead/Lag
• Bus1 VLL
• Bus1 Hz
• Bus2 VLL (optional)
• Bus2 Hz (optional)
• GB Command (Visible when Generator Breaker control is enabled.)
o
Open, Close, or None
• GGB Command (Visible when Generator Group Breaker control is enabled.)
o
Open, Close, or None
• MB Command (Visible when Mains Breaker control is enabled.)
o
Open, Close, or None
• TB Command (Visible when Tie Breaker control is enabled.)
o Open, Close, or None
• TB2 Command (Visible when Tie Breaker 2 control is enabled.)
o Open, Close, or None
Display Setup
BESTCOMSPlus ® Navigation Path: Settings Explorer, General Settings, Front Panel HMI
Front Panel Navigation Path: Settings > General Settings > Front Panel HMI
The DGC-2020HD LCD can be customized to fit the needs of your specific application. Most of the
options can be adjusted using the front panel buttons while all options can be adjusted within
BESTCOMS Plus . The display options are described below. Figure F shows the BESTCOMS Plus Front
Panel HMI settings screen. Settings are listed in Table B.