Moxa Technologies OnCell G3111-HSPA series, Руководство пользователя

Страница: 34 / 127

OnCell G3111/G3151-HSPA Series Basic Settings and Network Settings
5-6
OnCell G3111/G3151-HSPA products help out by periodically reporting their IP address to the IP location server,
in case the dynamic IP has changed. The parameters shown below are used to configure the Auto IP report
function. There are two ways to develop an “Auto IP report Server” to receive the OnCell’s Auto IP report.
1. Use the OnCell Search Utility’s IP Address Report function. Refer to OnCell Search Utility Configuration in
Appendix B – Software Installation/Configuration .
2. “Auto IP report protocol,” which can automatically receive the Auto IP report on a regular basis, is also
available to help you develop your own software. Refer to Appendix E for the “Auto IP report protocol.”
Auto IP report to host: Reports generated by the Auto report function will be sent automatically to this IP
address or host name.
Report to UDP port (default=63100): This is the UDP port number assignment for the serial port on the
OnCell G3111/G3151-HSPA.
Report period (default=99): You can use this option to set how often the IP address is automatically
reported.
ATTENTION
To use the OnCell Search Utility to receive the auto IP report message sent from the OnCell
G3111/G3151-HSPA,you must install the OnCell Windows Driver Manager. OnCell Windows Driver Manger
helps dispatch messages to the OnCell Search Utility.
Cellular Settings
This part of setting enables the WAN connection through cellular technologies. Refer to Chapter 6, Cellular
Network Settings , for detailed information.