OnCell G3111/G3151-HSPA Series
Initial IP Address Configuration
3-6
9.
Press
R
or use the arrow keys to select
Restart
and then press
ENTER
.
10.
Press
S
or use the arrow keys to select
System
and then press
ENTER
to restart the OnCell
G3111/G3151-HSPA.
Serial Console
The OnCell G3111/G3151-HSPA supports configuration through the serial console, which is the same as the
Telnet console but accessed through the RS-232 console port rather than over the network. Once you have
entered the serial console, the configuration options and instructions are the same as if you were using the
Telnet console.
The following instructions and screenshots show how to enter the serial console using PComm Terminal
Emulator, which is available free of charge as part of the PComm Lite suite. You may use a different terminal
emulator utility, although your actual screens and procedures may vary slightly from the following instructions.
1.
Turn off the power to the OnCell G3111/G3151-HSPA. Use a serial cable to connect the OnCell
G3111/G3151-HSPA’s serial console port to your computer’s RS-232 serial port.
2.
From the Windows desktop select
Start > All Programs > PComm Lite > Terminal Emulator
.
3.
The PComm Terminal Emulator window should appear. From the
Port Manager
menu, select
Open
, or
simply click the
Open icon
as shown below:
Содержание OnCell G3111-HSPA series
Страница 11: ...OnCell G3111 G3151 HSPA Series Getting Started 2 2 Panel Layout OnCell G3111 G3151 HSPA...
Страница 82: ...OnCell G3111 G3151 HSPA Series System Management Settings 9 18...
Страница 116: ...OnCell G3111 G3151 HSPA Series Pinouts and Cable Wiring C 3 Pin Assignments for DB25 Male and Female Connectors...
