Moxa Technologies OnCell G3111-HSPA series, Руководство пользователя

Страница: 17 / 127

OnCell G3111/G3151-HSPA Series Initial IP Address Configuration
3-2
Static and Dynamic IP Addresses
Determine whether your OnCell G3111/G3151-HSPA needs to use a static IP address or dynamic IP address
(either DHCP or BOOTP application).
• If your OnCell G3111/G3151-HSPA is used in a static IP environment, you must assign a specific IP
address using one of the tools described in this chapter.
• If your OnCell G3111/G3151-HSPA is used in a dynamic IP environment, the IP address will be
assigned automatically from over the network. In this case, set the IP configuration mode to DHCP or
BOOTP.
ATTENTION
Consult your network administrator on how to reserve a fixed IP address for your OnCell G3111/G3151-HSPA
in the MAC-IP mapping table when using a DHCP Server or BOOTP Server. For most applications, you should
assign a fixed IP address to your OnCell G3111/G3151-HSPA.
Factory Default IP Address
The OnCell G3111/G3151-HSPA is configured with the following default private IP address:
192.168.127.254
Note that IP addresses that begin with “192.168” are referred to as private IP addresses. Devices configured
with a private IP address are not directly accessible from a public network. For example, you would not be able
to ping a device with a private IP address from an outside Internet connection.
Configuration Options
OnCell Search Utility
You may configure your OnCell G3111/G3151-HSPA with the bundled OnCell Search Utility for Windows. Refer
to Appendix B, Software Installation/Configuration, for details on how to install and use OnCell Search Utility.
Web Console
You may configure your OnCell G3111/G3151-HSPA using a standard web browser. Refer to 4, Using the Web
Console , for details on how to access and use the OnCell G3111/G3151-HSPA web console.