Moxa Technologies OnCell G3111-HSPA series, Руководство пользователя

Страница: 27 / 127

OnCell G3111/G3151-HSPA Series Using the Web Console
4-4
2. In either case, the window below should appear, showing the list of sites that you have configured Internet
Explorer to trust. Add the IP address of your OnCell G3111/G3151-HSPA here (the factory default IP
address is 192.168.127.254).
After adding the OnCell G3111/G3151-HSPA’s IP address as a trusted site, you should be able to view the
web console by entering the OnCell G3111/G3151-HSPA’s IP address in your browser’s address bar.
Opening the Web Console
Open your web browser and enter 192.168.127.254 in the website address line. This is the default IP address
for the OnCell G3111/G3151-HSPA - if a new address has been assigned, enter the new address instead. Press
ENTER to load the page.
ATTENTION
The examples and figures in this chapter use the OnCell G3111/G3151-HSPA factory default IP address of
192.168.127.254. If you have assigned a different IP address to your OnCell G3111/G3151-HSPA, be sure to
adjust accordingly. Refer to
Chapter 3, Initial IP Address Configuration , for details on how to configure the
IP address.
Enter the console password if prompted. (This will not apply if you did not enable password protection for your
OnCell G3111/G3151-HSPA.) The password will be transmitted with MD5 encryption over the Internet.