ioLogik E2200 Series
Click&Go
4-23
Timer
The
Timer
function can be used to control the time settings of a logic rule. Actions such as “START”, STOP, and
“RESTART” can be configured here.
Select the IF condition for Timer and click on the property button (
) to enter the Timer Settings
window.
In the above figure, the “Used in:” column indicates this Timer is also used in Rule-0, which helps the user
identify the relationship between the rules. In addition, the Set Timer button (
) can be used to define
the default value of the Timer.
NOTE
The “STOP” operator stops the timer and returns to “Initial Timer Value”, and the “RESTART” operator clears
and restarts the timer.
ATTENTION
The STOP or RESTART operator should always be used to reset or to restart the timer. If you do not use these
operators, the Timer function can only be triggered once.
Содержание ioLogik E2210
