ioLogik E2200 Series
Click&Go
4-22
Relay (Counts)
In the THEN/ELSE action,
Relay
refers to the current counts specifying how many times a relay has been
triggered. The counts are stored internally and can be cleared. “RESET” is the only operator. Select the
THEN/ELSE action to Relay and click on the property button (
) to enter the Relay Settings window.
Internal Register (Integer)
Internal Register (Integer)
represents a status flag to link the status of the first logic to the second one by
specifying other actions in the THEN/ELSE fields. Values from 0 to 255 can be used here. Select the THEN/ELSE
action for Timer and click on the property button (
) to enter the Internal Register Settings window.
In the above figure, the “Used in:” column indicates that this Internal Register is also used in Rule-0, which
helps the user identify the relationship between the rules. In addition, the Set Internal Register button (
)
can be used to define the default values of all registers.
NOTE
Internal Register can be controlled by Modbus/TCP protocol. Refer to the appendix for the address list of all
Internal Registers.
Содержание ioLogik E2210
