Moxa Technologies ioLogik E2210, Руководство пользователя

Страница: 92 / 144

ioLogik E2200 Series Click&Go
4-19
If Conditions
Result of
OR Logic
Trigger of
Then Actions
Trigger of
ELSE Actions
A1 A2 A3
0 0 0 0 NO YES
0 0 1 1 YES NO
0 1 0 1 YES NO
0 1 1 1 YES NO
1 0 0 1 YES NO
1 0 1 1 YES NO
1 1 0 1 YES NO
1 1 1 1 YES NO
THEN/ELSE actions can be specified as follows:
THEN/ELSE
Actions
Operators Remark
Counter RESET Counter-x represents the number of the
Event Counter channel
DO ON, OFF DO-x represents the number of the channel.
Pulse Output STOP, START Pulse Output-x represents the number of the channel
AO Built-in or Expansion
Relay RESET ResetCNT-x represents the number of the relay channel.
Internal
Register
Reg-x represents the number of the internal register.
x = 00 to 23 / Trigger Value: 0 to 255
Timer STOP, START,
RESTART
Timer-x, x = 00 to 23
Max value: 4,294,967 seconds
SNMP Trap I/O Status Bindings: 3 sets
Active Message ID / Source IP Unicode supported
e-Mail Create the contents of the e-Mail
Short Message
Service
Select recipients from the phone book, define the content, and configure
the escalation
Data Log
Start/Stop
Start, Stop Select which profile to start or stop
FTP Service Select which profile and FTP server to upload the log file
NOTE The following THEN Actions are only supported by ioLogik W5300 Cellular Remote IO devices: Short Message
Service , Data Log Start/Stop , and FTP Service .