37/60
ST_PM_ Installation Manual_EN_V1.0 | 08.2020
Copyright © 2020 Mounting Systems GmbH
6.8
Module carrier rails
6.8.1
Tools and equipment
•
Cordless screwdriver with adjustable torque or torque wrench (M10, M8)
•
Spanner/ring spanner
•
Tape measure, set square, guideline
6.8.2
Work steps for installation of mono-facial module rail system
The design and installation of the module carrier rails may vary depending on the
module type, module number, configuration and the structural requirements. The
precise distances and lengths are specified in the project-specific part lists and
layout drawings.
Example:
L1 Length of module carrier rail L4 Centre-to-centre distance of module carrier rails
L2 Overhang
L5 Distance between module carrier rails
L3 Distance from rafter to module carrier rail
Figure 22 Installation dimensions for module carrier rails
Pay special attention to the accuracy of the measurements when mounting the
first module carrier rail. If necessary, use a guideline, since the distance to the end
of the rafter can vary from post to post.
