15/60
ST_PM_ Installation Manual_EN_V1.0 | 08.2020
Copyright © 2020 Mounting Systems GmbH
Figure 5 Support post spacing
Support post
A, B The driving depth (B) and the overall length (A) of the support post depend on the
structural analysis and are specified in the project-specific documents.
C
Height above ground
The height (C) is specified in the project-specific documents
Motor post
D, E The driving depth (E) and the overall length (D) of the motor post depend on the
structural analysis and are specified in the project-specific documents.
F
Height above ground
The top of the motor post must be 122,5 mm above the support post.
The centre-to-centre distance of the two support posts before and after the motor post,
and the spacing on the north side between the support post and the motor post are
project-specific.
All other spacing intervals for the support posts and the number of posts per tracker array
may change depending on the project planning and environmental conditions and is
specified in your project-specific documents.
↓ Centre-to-centre distance of the tracker array (project-specific)
Location of the tracker
array with offset motor
post.
Variable post spacing
(project-specific)
Variable post spacing
(project-specific)
L
3
