Motorola RFS Series Скачать руководство пользователя страница 514

Страница: 514 / 590

8-4

Motorola RF Switch System Reference Guide

7. Click the

Revert

button

to revert back to the last saved configuration.

8.1.3 Switch Memory Allocation

Use the

Memory

tab to periodically assess the switch’s memory load.

1. Select

Diagnostics

from the main tree menu.

2. Select the

Memory

tab.

The Memory tab is partitioned into the following two fields:

• RAM

• Buffer

3. Refer to the

RAM

field to view the percentage of CPU memory in use (in a pie chart format).

4. Refer to the

Free Limit

value to change the CPUs memory allocation limits. Free Limit should be

configured in respect to high bandwidth and increased load anticipated over the switch managed
network.

5. The

Buffers

field displays buffer usage information. The Buffers field consists the following information:

6. Click the

Apply

button to commit and apply the changes.

7. Click the

Revert b

utton to revert back to the last saved configuration.

8.1.4 Switch Disk Allocation

The

Disk

tab contains parameters related to the various disk partitions on the switch. It also displays

available space in the external drives (compact flash etc).

Name

The name of the buffer.

Usage

Buffers current usage

Limit

The buffer limit.

Содержание RFS Series















































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RFS Series

Отзывы:

Похожие инструкции для RFS Series

Бренды по названию

Популярные бренды

Motorola RFS Series, Справочное руководство системы

Результаты поиска

Содержание RFS Series

Отзывы:

Похожие инструкции для RFS Series

Бренды по названию

Популярные бренды