Motorola RFS Series, Справочное руководство системы

Страница: 304 / 590

5-22 Motorola RF Switch System Reference
7. Refer to the Status field. It displays the current state of the requests made from the applet. Requests are
any “SET/GET” operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel to close the dialog without committing updates to the running configuration.
5.2.9.2 Adding a New DHCP Pool Class
The Add DHCP Pool Class Configuration dialog is used to associate an existing class, created using
Adding a New DHCP User Class , to an existing pool, created using Adding a New DHCP Pool . It is also used
to configure a maximum of 4 pool class address range. To add a new DHCP pool class:
1. Select Services > DHCP Server from the main menu tree.
2. Select the Pool Class tab.
3. Click on the Add button from the Pool Class Names section.
4. Use the Pool Name field to define a new pool name. Enter the pool name created using Adding a New
DHCP Pool on page 5-6 .
5. Use the Class Name field to associate an existing class, created using Adding a New DHCP User Class
on page 5-18 .
6. The Pool Class Address Range field is used to assign address range to the class inside the pool. A
maximum of 4 address ranges can be assigned to a class.
a. Use the Insert button to enter the Start IP and End IP address range for a class.
b. Select a address range and click Remove to delete that particular address range.
7. Refer to the Status field. It displays the current state of the requests made from the applet. Requests are
any “SET/GET” operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel to close the dialog without committing updates to the running configuration.