manualshive.com logo in svg

Motorola RFS Series, Справочное руководство системы

Motorola RFS Series - надежная система радиочастотного сканирования для вашего бизнеса. Скачайте бесплатно Руководство по эксплуатации системы на manualshive.com для подробной информации о настройке и использовании. Узнайте, как эффективно управлять своими операциями с помощью этого надежного оборудования.

Поделиться
Скачать
background image

4-174   

Motorola RF Switch System Reference Guide

 

5. Click the 

Terms

 tab to set the terms and conditions for display to the user.

6. Click the 

Restore Defaults 

button to revert to the default settings in the Internal (Generated) Web Page.

7. Refer to the 

Allow List

 field, and enter any IP address (for internal or external Web sites) that may be 

accessed by the Hotspot user without authentication. 

8. Check the

 Use System Name in Hotspot URL 

to use the 

System Name

 specified on the main Switch 

configuration screen as part of the hotspot address.

9. Check the 

Logout on Browser Close

 button to log out hotspot users from the network when they close 

their web browsers.

10.Specify the maximum 

Hotspot Simultaneous Users

 to set a limit on the number of concurrent unique 

hotspot users for the selected VLAN.

11.TUse the 

Accounting

 drop-down menu to retrieve accounting information from the switch-managed 

network. You can select 

None

, 

Radius

, or 

Syslog

 from the menu for retrieving the accounting 

information.

12.Click the 

Radius Configuration 

button to define the RADIUS server settings.

13.Refer to the 

Status

 field for the current state of the requests made from applet. This field displays error 

messages if something goes wrong in the transaction between the applet and the switch.

14.Click 

OK

 to use the changes to the running configuration and close the dialog.

15.Click 

Cancel

 to close the dialog without committing updates to the running configuration.

4.12.1.2 Configuring an External Hotspot

Selecting the 

External

 option entails hosting your own external Web server using advanced Web content 

(using XML, Flash). To create a hotspot maintained by an external server:

1. Select 

Network 

> 

Wired Hotspot 

from the main menu tree. 

Small Logo URL

The Small Logo URL is the URL for a small logo image displayed on the Failed page 
when using the internal Web server. This option is only available if 

Internal

 is 

chosen from the drop-down menu above.

Main Logo URL

The Main Logo URL is the URL for the main logo image displayed on the Failed 
page when using the internal Web server. This option is only available if 

Internal

 

is chosen from the drop-down menu above.

Descriptive Text

Specify any additional text containing instructions or information for the users 
who access the Failed page on the internal Web server. This option is only 
available if 

Internal

 is chosen from the drop-down menu above. The default text 

is: “Either the username and password are invalid, or service is unavailable at this 
time.”

Header Text

Specifies the header text displayed on the Terms and Conditions screen. This option 
is only available if 

Internal

 is chosen from the drop-down menu above.

Descriptive Text

Displays the terms and conditions.

NOTE: 

In multi-switch hotspot environments if a single switch’s internal pages are 

configured for authentication on the other switches, those switches will redirect to their 
own internal pages instead. In these environments it is recommended to use an external 
server for all of the switches.

Содержание RFS Series















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RFS Series

Barksdale 8000 Series Operating Instructions Manual preview
8000 Series
Бренд: Barksdale Страницы: 6
Neol ePowerSwitch 8M+R2 User Manual preview
ePowerSwitch 8M+R2
Бренд: Neol Страницы: 74
Hansen HLL Series Specifications, Applications, Service Instructions & Parts preview
HLL Series
Бренд: Hansen Страницы: 4
Grizzly H8239 Instructions preview
H8239
Бренд: Grizzly Страницы: 2
Cabletron Systems SmartSwitch 2500 Reference Manual preview
SmartSwitch 2500
Бренд: Cabletron Systems Страницы: 402
Vega VEGAWAVE S 61 Operating Instructions Manual preview
VEGAWAVE S 61
Бренд: Vega Страницы: 44
Watchguard XTM 3 Series Hardware Manual preview
XTM 3 Series
Бренд: Watchguard Страницы: 26
Comtech EF Data CRS-280 Installation And Operation Manual preview
CRS-280
Бренд: Comtech EF Data Страницы: 70
Milestone pro MP-SU21T-KVM User Manual preview
MP-SU21T-KVM
Бренд: Milestone pro Страницы: 32
3onedata IES2100SL Series Quick Installation Manual preview
IES2100SL Series
Бренд: 3onedata Страницы: 3
Good Way USB 2-to-6 User Manual preview
USB 2-to-6
Бренд: Good Way Страницы: 13
AV Link 128.823UK User Manual preview
128.823UK
Бренд: AV Link Страницы: 2
Lindy 25018 User Manual preview
25018
Бренд: Lindy Страницы: 2
Woxcon MMX3232-N User Manual preview
MMX3232-N
Бренд: Woxcon Страницы: 51
Blue Sea Systems 8689 Manual preview
8689
Бренд: Blue Sea Systems Страницы: 2
SMC Networks EZ HUB 10/100 5608DS User Manual preview
EZ HUB 10/100 5608DS
Бренд: SMC Networks Страницы: 2
j5 create Wormhole Station JUH-320 Quick Installaion Manual preview
Wormhole Station JUH-320
Бренд: j5 create Страницы: 9
Clinton Electronics CE-PSG-5088V Quick Installation Manual preview
CE-PSG-5088V
Бренд: Clinton Electronics Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды