Motorola RFS Series Скачать руководство пользователя страница 390

Страница: 390 / 590

6-36

Motorola RF Switch System Reference Guide

4. Click the

Add

button within the Associated Rules field.

5. Use the

Precedence

field to enter a precedence (priority) value between 1 and 5000.

The rules within an ACL will be applied to packets based on their precedence value. Rules with lower
precedence are always applied first.

6. Use the

Operation

drop-down menu to define a permit, deny or mark designation for the ACL. If the

action is to mark, the packet is tagged for priority.

7. Select the

Logging

checkbox to generate log messages when a packet has been forwarded, denied or

marked based on the criteria specified in the access lists.

8. If

mark

is selected from within the

Operations

drop-down menu, the Attribute to mark field is enabled.

Select the 802.1p (0 - 7) or TOS(0 - 255) or DSCP(0-63) checkbox and define the attribute receiving priority
with this ACL mark designation.

9. From within the

Filters

field, select a

Source Mask Length

from the drop-down menu.

The

Source Mask Length

is the size of the network or host (in mask format). The mask length defines

a match based on the Network / Host.

10.Use the

Source Address

field to enter the IP address where the packets are sourced.

11.Refer to the

Status

field for the current state of the requests made from applet. This field displays error

messages if something goes wrong in the transaction between the applet and the switch.

12.Click

to use the changes to the running configuration and close the dialog.

13.Click

Cancel

to close the dialog without committing updates to the running configuration.

6.4.11.3 Editing an Existing Rule

As network and access permission requirements change, existing ACL rules need to be modified to be
relevant with new client access requests.

To modify an existing ACL rule:

NOTE:

If adding an access control entry to an ACL using the switch SNMP interface,

Precedence

is a required parameter.

Содержание RFS Series















































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RFS Series

Отзывы:

Похожие инструкции для RFS Series

Бренды по названию

Популярные бренды

Motorola RFS Series, Справочное руководство системы

Результаты поиска

Содержание RFS Series

Отзывы:

Похожие инструкции для RFS Series

Бренды по названию

Популярные бренды