MOTO GUZZI V11 BALLABIO, Руководство по ремонту

Страница: 105 / 208

38
R
Q
P
O
N
M
L
I
H
G
F
E
D
C
B
A
V11 S
PORT
M
Y
2003 - L
E
M
ANS
M
Y
2003
R
OSSO
C
ORSA
- C
AFE
S
PORT
- B
ALLABIO VARIANTS
R
EMOVAL WITH
Ö
HLINS
1
ST
SERIES FORK
:
• Place a support under the motorbike so you can lift
the front wheel from the ground;
• Remove the calipers as described in Marzocchi fork
removal procedure;
• Loosen the 2 screws fastening the spindle to the fork
right struts;
• Remove the shaft protective cap (right side);
• Unscrew the spindle and remove the wheel.
For information on overhauling, see chapter 3 in section
F.
R
EASSEMBLY WITH
Ö
HLINS
1
ST
SERIES FORK
:
After having carried out all the necessary tests on the
wheel, reassemble in the following way:
•
Insert the complete wheel between the fork struts;
• Lubricate the wheel spindle shaft and threading with
recommended grease;
• Grease the threading on the LH strut;
• Screw down the wheel spindle;
• Tighten the 2 screws between shaft and fork right leg
to the specified torque.
• Fit protective cap onto shaft (right side);
• Refit the brake calipers by tightening the fastening
screws to the prescribed torque;
• Check that the disks move freely inside the calipers
and then repeatedly activate the brake lever to restore
the normal position of the caliper pistons.