Mondolfo Ferro AQUILA RAPTOR, Руководство оператора

Страница: 63 / 206

- E
nglIsh
- Operator’s manual 63
A
B
C
21
9 • Upper bead demounting (fig. 22)
- Check that the tool has engaged with the tyre
bead.
- Operate (control 28) to get the machine ready
for the subsequent demounting operation
(performed with the wheel at a standstill and
not rotating).
- Make sure that the tyre has not beaded in on
the operator's side. If necessary, use a clamp
and/or a bed presser.
- Only then operate pedal (15) until the bead
is completely demounted.
- Here again, it might be helpful to use the bead
breaker disc on the lower part of the tyre.
- Upon demounting, if the tyre tends to slip on
the rim edge, the HELP accessory supplied can
be used (see “PRACTICAL HINTS, ADVICE AND
USEFUL INFORMATION”).
22
10 • Lower bead demounting (fig. 23)(Using
tool-carrying head)
- Place the tool on the edge of the rim (A).
- Push the bead breaker disc against the bottom
bead (B) using control 23.
- Using control 28, operate the hook and engage
the bottom bead of the tyre (C-D).
- Operate pedal 15 to rotate the wheel until
the tyre is completely demounted from the
rim (E).