22
Molift Air / www.molift.com
Brake
Change brake
1. Open both sidecovers
2. Disconnect battery
3. Remove batteryclamp (hex key 5mm) and take
out battery
4. Remove both hex keys
5. Loosen setscrew (hex key 2,5mm) to remove
sleeve from brake
6. Remove both screws holding the brake (hex
key 3mm)
7. Disconnect the wire from PCB
8. Remove and change the brake. Remount in
reverse order.
Check after installation
Test the electric emergency lowering
Test lifter with one lifting cycle with SWL,
the brake should not slip
Perform and fill out Safety checklist
after service and repair
Lifting Band Parts
Article no.
2510145
Brake 24V DC
Содержание Air 300
Страница 1: ...TM16101 Rev A 2013 11 14 Molift Air EN Technical manual...
Страница 8: ...7 Molift Air www molift com Air Basic Exploded Drawing 20 001 Rev K Air Components...
Страница 10: ...9 Molift Air www molift com Air IRC Basic Exploded Drawing 20 012 Rev E...
Страница 35: ...34 Molift Air www molift com Notes...