Molift Air 300, Техническое руководство

Страница: 6 / 36

5
Molift Air / www.molift.com
Technical description
The motor for raising and lowering is of the 24 V
DC (direct current) type fitted with a worm gear
and 24V DC Brake.
The trolley is directly connected to the gearhouse,
and the gearhouse is loadbearing.
The lifter is programmed with a maximum current
limit for lifting motor. It prevents the lifter from
lifting more than SWL.
Sensors/Microswitches
• End/Angle: Activated if band angle to steep, or
band completely in.
• Band Slack: Activated if band is not in contact
with the guiding drum. This occurs if no
weight is applied to lifting band, or band is
completely out.
• Drum size: The switch is activated by a trigger
arm when more than half of the lifting band
is out, approx. 150 cm/60 inches. When the
micro switch is activated it reduces the maxi-
mum current limit. The current limit prevents
the lifter from lifting more than SWL. More
band on the drum gives higher torque and the
motor will require more current to lift max load
when drum is full of band, and less current
when drum is empty.
Variant Matrix Lifter/Trolley
Standard Molift Rail:
Article no. Lifter Trolley
2501205 Molift Air 205 2520000 Basic Trolley
2501300 Molift Air 300 2520000 Basic Trolley
2501210 Molift Air 205 Propulsion 2500103 Trolley Propulsion
2501310 Molift Air 300 Propulsion 2500103 Trolley Propulsion
2501215 Molift Air 205 IRC 2520002 Trolley IRC
2501315 Molift Air 300 IRC 2520002 Trolley IRC
2501220 Molift Air 205 IRC Propulsion 2520006 Trolley IRC Propulsion
2501320 Molift Air 300 IRC Propulsion 2520006 Trolley IRC Propulsion
Trolley for other Rail Systems:
2520001 Trolley Basic Type G+I
2520004 Trolley Basic Type L+N
2520005 Trolley Basic Type M