13
TM SmartCool One 5057724 v1.0_08_2022
Airflow
Features
System Configuration
SO09
SO12
SO15
SO18
SO22
SO25
SO31
SO35
SO30
SO40
SO50
SO60
Airflow
EC Backward Curved Fans in Floor Stand
● ● ● ● ● ● ● ● ● ● ● ●
ISO-C-80 Filtration (G4 equivalent)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ISO-C-90 Filtration (F5 equivalent)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
MERV 8 Filtration
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
MERV 11 Filtration
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
No Filtration
● ● ● ● ● ● ● ● ● ● ● ●
Return Air Temperature Sensor
● ● ● ● ● ● ● ● ● ● ● ●
Supply Air Temperature Sensor
● ● ● ● ● ● ● ● ● ● ● ●
Supply/Return Air Temperature and Humidity
Monitoring
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
●
Standard Feature
○
Optional Feature
–
Not Available
EC Backward Curved Fans in Floor Stand
Electronically Commutated (EC) Fan Motor
EC motors incorporate integrated electronics to convert AC power to DC
for efficient and accurate speed control and are adjustable via the touch
screen display. The fans offer maximum air flow performance while
keeping sound levels to a minimum. It gives the flexibility of connecting
to AC mains with the efficiency and simple speed control of a DC motor.
The EC fan offers significant power reduction in comparison with an
equivalent AC fan at modulated fan speeds. The in built EC fan control
module allows for fan speed modulation from 20-100%. A standard AC
fan’s modulating range is typically 40 -100% of full fan speed. Standard
voltage regulated (VR) fan speed controllers offer a linear response. The
illustration on the right shows a comparison of the typical power input
required by each method.
Input Power
Airflow
EC (Electronically Commutated) Fan Speed Control
Regulated (VR) Fan Speed Control
Key
ISO-C-80 Filtration (G4 equivalent)
Vertical pleated disposable panel filters in a rigid frame conforming to ISO-C-80 are available as an option. If these are
selected, the controller will provide an alarm following a pre set run time limit being exceeded. Access and removal are
from the front of the unit.
Higher Grade ISO-C-90 Filtration (F5 equivalent)
Pleated disposable panel filters conforming to filtration class of ISO-C-90 are available for those applications which
require a higher level of filtration.
MERV Filtration
MERV rated filters have been sized for US applications where MERV rated filtration is required. The ISO Coarse 80%
and ISO Coarse 90% have equivalent MERV rated filters of MERV 8 and 11 respectively.
No Filtration
The no filtration standard configuration offers increased unit efficiency with lower air side pressure drop and allows
higher maximum air volumes. The no filtration configuration also removes maintenance requirements to change the
filters providing the data hall has pre-conditioned air that has already been filtered.
Supply/Return Air Temperature and Humidity Monitoring
The option of supply and return temperature monitoring replaces the standard temperature sensors with temperature
and humidity sensors, allowing the customer to also monitor the level of humidity at the unit. The humidity level reading
can be used with an external room level humidifier.
Precision Air Conditioning
SmartCool™
Introduction
