MobileView PENTA, Руководство по установке

Страница: 9 / 114

Chapter 1: Introduction
MobileView PENTA Installation Manual 3
Figure 1: Typical MobileView PENTA system layout
1. Aluminum housing
2. Camera
3. Up to 16 cameras per DVR
4. RG179 Siamese coaxial
cable
5. GPS antenna
6. DVR assembly
7. Wireless bridge
8. Wireless antenna
9. Wireless antenna cable
10. Microphones
11. Ethernet cable
12. Panic button
13. Accelerometer
14. Impact sensor
The central component of the MobileView system is a high-quality DVR, which
records images from eight or sixteen cameras (monochrome or color) depending
on model, dual-channel audio and other information such as the time, date, and
vehicle number. You can adjust image storage capacity by changing your
recording speed, selected resolution, and drive size.
The DVR begins capturing video within 90 seco
nds of receiving the vehicle’s
ignition signal. It continues to capture data while that signal is present and for a
programmable shutdown delay period after the vehicle ignition signal expires.
Surveillance and event-based video data is stored on a mobile-rated, removable
hard disk drive caddy. When available storage capacity is full, the DVR
automatically overwrites the oldest data with new data in a FIFO (first-in, first-out)
fashion.
Note: Most MobileView products are not supplied with mounting hardware.
Exceptions are noted in the appropriate sections of the manual.
The MobileView solution uses Video Manager software for the review of
surveillance and event-based video stored on the DVR. Video Manager is also