MobileView PENTA, Руководство по установке

Страница: 64 / 114

Chapter 4: DVR configuration
58 MobileView PENTA Installation Manual
Figure 46: Alarm Events page
To configure an alarm event:
1. Open the Alarm Events page.
2. Click Add New Event and enter the event name in the Description field.
3. Leave the Code field blank and enter values (in seconds) in the Mask time
and Hold time fields.
Mask time refers the amount of time any actions associated with the alarm
event are masked. Hold time refers to the amount of time an alarm event is
halted.
4. Define the input that activates the event from the available options in the
Event Activation section. You can only specify one activation input per event.
5. If using time-based activation, define a schedule in the Activation Schedule
section.
6. Define the output reactions that occur when the event is active. Multiple
output reactions can be assigned to a single event.