MobileView PENTA, Руководство по установке

Страница: 56 / 114

Chapter 4: DVR configuration
50 MobileView PENTA Installation Manual
•
I/O Devices. Defines the generic input and out identification.
•
System. Defines low-level operating characteristics of the DVR.
Note: The subsequent sections provide limited information necessary to
accommodate initial DVR setup. For more information on functions and options,
see the
MobileView Video Manager User Manual .
Vehicle setup
To configure a vehicle:
1. Click Vehicle Setup in the System Configuration dialog box (Figure 40 on
page 51) to open the Vehicle Setup page (Figure 40 on page 51).
2. Enter your depot ID and the corresponding vehicle ID.
The depot ID typically represents the description of the property to which the
vehicle is assigned. If installed, this text entry should match the depot ID
stored in the Fleet Manager System.
The vehicle ID is the actual machine name of the DVR as seen in the
MobileView network and must be unique.
3. Designate the DVR tracking mode.
Select Mobile recorder if the system has GPS information. Systems with no
current or future need for GPS should select None.
4. Ensure the Display Disk Full as Fault check box is clear.
This ensures routine file deletions and maintenance do not activate a system
fault.
5. Ensure that the Display future recording time warning box is checked.
This ensures a system fault is activated if the latest stored surveillance data is
more than 5 minutes ahead of the current DVR time.
6. Click Apply to save the new settings.