MobileView PENTA, Руководство по установке

Страница: 53 / 114

Chapter 4: DVR configuration
MobileView PENTA Installation Manual 47
Caution: Failing to properly adjust system time may cause time-based searches
to fail or result in partial or complete data loss.
To adjust your system time:
1. Establish a remote connection.
See “Remote desktop connection” on page 44.
2. Double-click the system clock in the taskbar (shown below).
The Date and Time Properties dialog screen opens.
3. Select the Date & Time tab and adjust settings to local time.
4. Select the Time Zone tab and adjust settings to the correct time zone.
5. Apply the daylight saving time adjustment, if applicable.
6. Select the Internet Time tab and adjust time server settings. This step is
optional.
7. Click Apply.
8. Since these changes are being made to write-protected drive C, be sure to
commit the changes and reboot the DVR. See “Committing DVR changes”
below.
Committing DVR changes
The C drive on the DVR is write-protected. Any changes to the OS or registry,
such as setting the time zone or loading an application upgrade, require
completion of a special write operation to update the read-only image. The DVR
provides this function using an onboard “commit” utility.
To permanently write changes to the C drive:
1. Establish a remote desktop connection.
See “Remote desktop connection” on page 44 for more information.
2. Make changes to the system as required.
Examples of changes could be time settings or IP addresses.