manualshive.com logo in svg

MobileView PENTA, Руководство по установке

Поделиться
Скачать
MobileView PENTA Скачать руководство пользователя страница 68

Chapter 4: DVR configuration 

62 

MobileView PENTA Installation Manual 

To configure system options: 

1.  Open the System page. 

2.  Define the storage parameters in the Storage Allocation and Usage section. 

See “Storage allocation and usage” below for more information. 

Caution: 

Once set, the values in Table 8 on page 63 should not be changed.  

Modifying these settings will reinitialize the data acquisition system and purge 
all stored audio and video data. 

3.  Define the parameters related to system cameras in the System Settings 

section. 

Set the Shutdown dwell time. This is the amount of time the DVR delays 
shutdown after the vehicle ignition has been turned off. 

4.  Define parameters related to system cameras in the Camera Settings section. 

Set the number of cameras installed on the system. When the number of 
video inputs drops below this number, the DVR activates a system fault. 

Set the camera restart dwell time. When a video signal is lost, the system 
checks for the return of that signal at the specified interval.  The minimum 
setting is 10 seconds. 

Set the camera shutdown dwell time. This is amount of time the DVR will 
continue recording after the vehicle ignition has been turned off.  This setting 
should be less than or equal to the system shutdown dwell time. 

Note: 

The camera shutdown dwell time does not override the system 

shutdown dwell time. 

5.  Define the archive and log file purge days under the Archive and Log Storage 

section 

• 

Archive file retention.

 Defines how long video archive files remain on the 

DVR before being automatically purged. The default value is 30 days. 

• 

Log file retention.

 Defines how long log and discrete image files remain 

on the DVR before being automatically purged. The default value is 90 
days. 

6.  Click Apply to save the new settings. 

Storage allocation and usage 

Storage allocation and usage options specify how much of the available storage 
should be set aside for video, sound, GPS, and alarm/event storage. These are 
set by the installer and should not be changed. Any change to these values 
reinitializes (deletes) the primary data store on the DVR. 

Содержание PENTA



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды