Mitsubishi QD75M1, Руководство пользователя

Страница: 20 / 882

1 - 3
MELSEC-Q
1 PRODUCT OUTLINE
(c) Continuous positioning control using multiple positioning data can be
executed in accordance with the operation patterns the user assigned to
the positioning data. (Refer to section 5.3 and 9.1.2.)
Continuous positioning control can be executed over multiple blocks, where
each block consists of multiple positioning data. (Refer to section 10.3.2.)
(d) OPR control is given additional features (Refer to section 8.2.)
Four different machine OPR methods are provided: the near point dog
method, two count methods, and the data set method.
(e) Two acceleration/deceleration control methods are provided: automatic
trapezoidal acceleration/deceleration and S-pattern acceleration/
deceleration. (Refer to section 12.7.7.)
(3) Quick startup (Refer to section 3.1.)
A positioning operation starts up quickly taking as little as 6 ms to 7 ms: linear
control (3ms: when pre-reading start).
Even when two or more axes are instructed to start up simultaneously
(either by independent control or by coordinated control using interpolation),
there will be no irregularity of startup timings between different axes.
(4) SSCNET makes the connection to the servo amplifier possible
(a) The QD75 can be directly connected to the servo amplifier using the
MELSERVO (Mitsubishi's servo amplifier: MR-H-BN, MR-H-BN4, MR-J2-B,
MR-J2S-B, MR-J2-Jr, MR-J2M-B) and SSCNET.
(b) Because the SSCNET cable is used to connect the QD75 and the servo
amplifier, or servo amplifiers, saving wiring can be realized. The cable
between the QD75 and servo amplifier or servo amplifiers can be extended
up to 30m.
(c) The servo parameters can be set on the QD75 side to write or read them
to/from the servo amplifier using the SSCNET.
(d) The actual current value and error description contained in the servo can
be checked by the buffer memory of the QD75.
(5) Easy application to the absolute position system
(a) The absolute position-corresponding servo amplifier is connected to have
an application to the absolute position system.
(b) Once the OP have been established, the OPR operation can also be made
unnecessary when the power is supplied.
(c) With the absolute position system, the data set method OPR is used to
establish the OP.
(d) When the setting unit is "degree", the absolute position system with
unlimited length feed can be configured.