Mitsubishi MOTORS Outlander PHEV 2018, Руководство пользователя

Страница: 220 / 457

Forward Collision Mitigation System (FCM) (if so equipped)
Features and controls 5-99
5
Every time the operation mode of the power
switch is put in ON, the FCM will automati-
cally be turned on.
To turn off the FCM, press and hold the FCM
ON/OFF switch. The following message and
indicator will appear in the multi-infor-
mation display.
To turn on the FCM again, press and hold the
FCM ON/OFF switch. The
indicator will
go off, and a current distance mode for the
forward collision warning will be shown in
the multi-information display.
The distance to the vehicle ahead which trig-
gers the forward collision warnings can be
selected from three levels, “FAR”, “MID-
DLE” or “NEAR”.
To change the distance mode, press the FCM
ON/OFF switch. Every time the switch is
pressed, the distance mode will be switched.
The selected distance mode is shown on the
information screen of the multi-information
display.
When “FAR” is selected
When “MIDDLE” is selected
When “NEAR” is selected
N00593300022
When the FCM system determines that its
performance has been degraded, the FCM
will become inoperative.
This can occur when
 Foreign objects, such as dirt, snow, ice,
mist or dew condensation adhere to the
windshield of the sensor portion.
 In adverse weather conditions, such as
rain, snow, sand storms, etc.
 A front vehicle or an oncoming vehicle is
splashing water, snow or dirt.
To turn on/off the FCM To change forward collision warn-
ing distance
NOTE
 Actual distance which triggers the forward
collision warnings will vary depending on
your vehicle speed and the front vehicle
speed. The distance will become longer
when the vehicle speeds are higher.
 The distance which will trigger the FCM
braking function cannot be adjusted.
When a problem is detected
BK0254400US.book 99 ページ ２０１７年８月１０日 木曜日 午後１時５０分